* speci?ations subject to change without notice. dimensions are in mm?.25 unless stated otherwise. idea, inc., 1351 titan way, brea, ca 92821 ph:714-525-3302, 800-led-idea; fax: 714-525-3304 catalog 995a t-1 led indicator, right-angle, pcb mount J946B series the J946B is made up of 2 t-1 led lamps assembled into a black plastic holder and can be cmos driven to save components. the leads are formed at right angles to the light emitting side of the assembly for through hole mounting on pcbs. the design of t he J946B holder maintains all external dimensions but will be cored in appropriate places to minimize sink marks. material of the housi ng is black nylon 6/6 with ?er, rated ul94v0. please note that the dimensions are in inches. specify part desired as follows: J946B/order code led1 + order code led 2 for example: ?946b/h+g designates a red led on top with a green led below. order code and information (all ratings at 25? ambient) led lamp typical characteristics recom. op. if (ma) epoxy & type color order code peak vf (v) iv (mcd) 2 1/2 (nm) @if=20ma @if=2 ma (deg) tinted diffused red i 639 1.8 4.0 50 2 - 10 green g 575 1.7 2.5 60 2 - 10 yellow y 591 1.85 4.0 45 2 - 10 .125 max .150 .15 .45 .55 .28 .14 .19 max .600 .15 .100 .12 min .85 max + + (typ for single color) (typ for bi-color) green anode red or yellow anode pin connection:
|